(1) Vendor needs to provide Door Hardware and Keying Retrofit Services to the government authority located in Rhode Island.– Mechanical and electrified door hardware.– Field verification, preparation and modification of existing doors and frames to receive new door hardware.– Provide hinges conforming to ANSI/BHMA A156.1.– Provide five knuckle, ball bearing hinges.– 1–3/4 inch 44 mm thick doors, up to and including 36 inches 914 mm wide.– Interior: Standard weight, steel, 4–1/2 inches 114 mm high.– Adjust hinge width for door, frame, and wall conditions to allow proper degree of opening.– Provide three hinges per door leaf for doors 90 inches 2286 mm or less in height, and one additional hinge for each 30 inches 762 mm of additional door height.– Steel Hinges: Steel pins.– Provide door cords with electrified options as scheduled in the hardware sets.– Provide with number and gage of wires enough to accommodate electric function of specified hardware.– Provide grooved touchpad type exit devices, fabricated of brass, bronze, stainless steel, or aluminium, plated to standard architectural finishes to match balance of door hardware.– Provide flush end caps for exit devices.– Provide cylinder or hex–key dogging as specified at non–fire–rated openings.(2) All questions must be submitted no later than April 25, 2024.(3) A pre–bid meeting will be held on April 19, 2024
↧